Hp xw4600 workstation core 2 quad q9550 đánh giá

Quad-Core and Dual-Core are new technologies designed to improve performance of multithreaded software products and hardware-aware multitasking operating systems and may require appropriate operating system software for full benefits; check with software provider to determine suitability; not all customers or software applications will necessarily benefit from use of these technologies.

Chipset Intel X38 Express chipset Color Carbonite/Alloy metallic Convertibility Yes. 5.25" drives rotate for Minitower or Desktop orientationExpansion Slots [see system board section for more details]

• 3 PCI slots [full-height, full-length]
• 1 PCI Express x8 slot [x4 functionality]
• 1 PCI Express x1 slot [half length]
• 2 PCI Express x16 Gen2 slots [one dedicated for graphics] Expansion Bays [see storage section for more details]
• 2 internal 3.5" bays
• 1 external 3.5" bay, 3 external 5.25" bays*

* Third external 5.25" bay is not full depth in side orientation.

Front I/O

2 USB 2.0, 1 IEEE 1394 [requires optional PCI card to function], 1 audio out, and 1 microphone.

NOTE: Although HP Personal Workstations can be ordered with the HP Installer Kit for Linux and an IEEE 1394 card, HP cannot provide customer support for this configuration. Please refer to the Linux Hardware Support Matrix [//www.hp.com/support/linux_hardware_matrix] for details, and to the Linux User Manual [//www.hp.com/support/linux_user_manual] for tips on user-enablement of the IEEE 1394 Card.

Internal I/O 1 USB 2.0 Type A Receptacle, 2 USB 2.0 headers Rear I/O 7 USB 2.0, 1 serial, 1 optional serial port, parallel port, 2 PS/2, RJ-45 [NIC], 1 External SATA, 1 audio line in, 1 audio line out, 1 microphone in; audio ports can be retasked to function as line in, line out, microphone, or headphone. Interfaces Supported 1 SATA 3 Gb/s interface [5 internal, 1 external SATA connectors] On-board RAID Support SATA [Specific user-configured hardware SAS RAID configurations are supported on this Linux system. Please visit: //www.hp.com/support/linux_hardware_matrix for details.]Chassis Dimensions [W x D x H] Standard minitower orientation: 16.8 x 45.6 x 45.0 cm; 6.6 x 17.9 x 17.7 inches Converted desktop orientation: 45.0 x 45.6 x 16.8 cm; 17.7 x 17.9 x 6.6 inches Weight Exact weights depend upon configuration Minimum: 13.6 kg [29.9 lbs] Standard: 15.1 kg [33.3 lbs] Maximum: 19.6 kg [43.3 lbs] Temperature Operating: 5° to 35°C [40° to 95°F] Non-operating: -40° to 60°C [-40° to 140°F] Humidity Operating: 8% to 85% Non-operating: 8% to 90%Maximum Altitude [non-pressurized] Operating: 3,000 m; 10,000 feet Non-operating: 9,100 m; 30,000 feet Power Supply 475 watts wide-ranging, active Power Factor Correction, 85% Efficient NIC Integrated HP Gbit LAN by Broadcom Manageability Preloaded Manageability Tools [Microsoft Windows® only]

Supported Components

Processors Factory Configured Option Kit Option Kit Part Number Support Notes Intel Core� 2 Duo/Quad-Core Processor with Intel® 64 Architecture

Intel Core 2 Quad Q9650 Processor / 3.00 GHz, 12 MB L2 cache, 1333 MHz FSB

Y N Intel Core 2 Quad Q9550 Processor / 2.83 GHz, 12 MB L2 cache, 1333 MHz FSB Y N Intel Core 2 Quad Q9505 Processor / 2.83 GHz, 6 MB L2 cache, 1333 MHz FSB Y Y Intel Core 2 Quad Q9400 Processor / 2.66 GHz, 6 MB L2 cache, 1333 MHz FSB Y Y Intel Core 2 Quad Q8400 Processor / 2.66 GHz, 4 MB L2 cache, 1333 MHz FSB Y Y Intel Core 2 Duo E8600 Processor / 3.33 GHz, 6 MB L2 [shared], 1333 MHz FSB Y N Intel Core 2 Duo E8500 Processor / 3.16 GHz, 6 MB L2 [shared], 1333 MHz FSB Y N Intel Core 2 Duo E8400 Processor / 3.00 GHz, 6 MB L2 [shared], 1333 MHz FSB Y N Intel Core 2 Duo E7600 Processor / 3.06 GHz, 3 MB L2 cache,1066 MHz FSB Y Y Intel Core 2 Duo E7500 Processor / 2.93 GHz, 3 MB L2 cache,1066 MHz FSB Y N Intel Pentium Dual-Core Processor with Intel® 64 Architecture Intel Pentium Dual-Core E5200 Processor / 2.50 GHz, 2 MB L2 cache, 800 MHz FSB Y N

Most Intel Core 2 Duo and Core 2 Quad processors support Intel Virtualization Technology. Intel Virtualization Technology requires a computer system with a processor, chipset, BIOS, virtual machine monitor [VMM], and applications enabled for virtualization technology. Functionality, performance, or other virtualization technology benefits will vary depending on hardware and software configurations.

for details. Intel® 64 Architecture requires a computer system with a processor, chipset, BIOS, operating system, device drivers, and applications enabled for Intel® 64 Architecture. Processor will not operate [including 32-bit operation] without an Intel® 64 Architecture-enabled BIOS.

for more information, including details on which processors support Intel® 64 Architecture, or consult with your system vendor for more information.

SAS Hard Drives Up to 4 of the following SATA drives, or 4 of the following SAS drives [conditions apply]

Factory Configured

Option Kit

Option Kit Part Number

Support Notes HP SAS [Serial Attached SCSI] Hard Drives for HP Workstations 146 GB 15K rpm SAS 3.0 Gb/s 3.5" Hard Drive

Y

Y

EA330AA

300 GB 15K rpm SAS 3.0 Gb/s 3.5" Hard Drive Y Y EM174AA 450 GB 15K rpm SAS 3.0 Gb/s 3.5" Hard Drive

Y

Y

FM803AA

SATA Hard Drives SATA [Serial ATA] Hard Drives for HP Workstations 80 GB 10K rpm SATA with NCQ Hard Drive

Y

Y

EM172AA

160 GB 7,200 rpm SATA 3.0 Gb/s with NCQ 3.5" Hard Drive Y Y PV944A 160 GB 10K rpm SATA with NCQ 2.5" Hard Drive

Y

Y

EW222AA

250 GB 7,200 rpm SATA 3.0 Gb/s with NCQ 3.5" Hard Drive Y Y EA788A 500 GB 7,200 rpm SATA 3.0 Gb/s with NCQ 3.5" Hard Drive Y Y PV943A 1000GB [1TB] SATA 7200 rpm 3.0Gb/s 3.5" HDD

Y

Y

GE262AA

Hard Drive Controllers

Factory Configured

Option Kit

Option Kit Part Number

Support Notes Factory integrated RAID on motherboard for SATA drives RAID 0 Configuration - Striped Array

Y

Y

RAID 0 Data Configuration -- Boot/OS Drive + 2 Drive Striped Array

Y

Y

RAID 1 Configuration - Mirrored Array YY Integrated SATA 3.0 Gb/s Controller Integrated SATA 3.0 Gb/s Controller, RAID 0, 1, 10, 5 supported YY See NOTE 2 LSI 3041E 4-Port SAS 3.0 Gb/s RAID Card LSI 3041E 4-Port SAS 3.0 Gb/s RAID Card YY EH417AA See NOTE 2 and 3 LSI MegaRAID® SAS 8888ELP Host Bus Adapter [HBA] LSI 8888ELP 8-port SAS HW RAID Card YY GE258AA

All drives must be identical in type and capacity

All RAID arrays must be less than 2 TB

NOTE 1: Requires identical hard drives [speeds, capacity, interface. Specific user-configured hardware SAS RAID configurations are supported on this Linux system. Please visit: //www.hp.com/support/linux_hardware_matrix for details. NOTE 2: Specific user-configured hardware SAS RAID configurations are supported on this Linux system. Please visit: //www.hp.com/support/linux_hardware_matrix for details. NOTE 3: Not supported when HD drive 1 is SATA

PCI Express Graphics

Factory Configured

Option Kit

Option Kit Part Number

Support Notes Supported Multi Mixed Professional 2D NVIDIA Quadro NVS 290 256 MB PCIe Graphics Card with 'DMS-59 to Dual DVI cable' included - for Workstations Y Y GN502AA 1 or 2 of these cards are supported - 2nd card must be NVS 290 or NVS 440 1 HP 'DMS-59 to Dual VGA' Cable Kit Y Y GS567AA 1 NVIDIA Quadro NVS 295 256MB PCIe Graphics Card Y Y FY943AA 1 NVIDIA Quadro NVS 450 512 MB PCIe Graphics Card

Y

Y

FH519AA

Single NVS 450 or NVS 290 + NVS 440 supported; Includes [2] DMS-59 to Dual VGA cables and [2] DMS-59 to Dual DVI cables 1 Entry 3D ATI FirePro V3700 256MB PCIe Graphics Card Y Y FY944AA 1 NVIDIA Quadro FX 380 256MB PCIeGraphics Card Y Y NB769AA 1 NVIDIA Quadro FX 580 512MB PCIe Graphics Card Y Y FY945AA 1 Mid-range 3D ATI FirePro V5700 512MB PCIe Graphics Card Y Y FY947AA 1 NVIDIA Quadro FX 1800 768MB PCIe Graphics Card Y Y FY946AA 1 High-end 3D ATI FirePro V7750 1.0GB PCIe Graphics Card Y Y FY948AA 1 NVIDIA Quadro FX 3800 1.0GB PCIe Graphics Card Y Y FY949AA 1 NVIDIA Quadro FX 4800 1.5GB PCIe Graphics Card

Y

Y

FQ138AA

See NOTE 1 1 Elemental Accelerator Software for NVIDIA Quadro Y Y VH158AA 1 NOTE 1: This card consumes 2 PCIe slots, reducing the maximum number of PCI cards in a system

Memory

Configure To Order [CTO] [One of the following]

Option Kit Part Number Support Notes PC2-6400 ECC Unbuffered DDR2-800 RAM HP 1GB [1x1GB] DDR2-800 non-ECC RAM HP 1GB [1x1GB] DDR2-800 ECC RAM HP 2GB [2x1GB] DDR2-800 non-ECC RAM HP 2GB [2x1GB] DDR2-800 ECC RAM HP 4GB [2x2GB] DDR2-800 ECC RAM HP 4GB [4x1GB] DDR2-800 ECC RAM HP 8GB [4x2GB] DDR2-800 ECC RAM HP 8GB [2x4GB] DDR2-800 ECC RAM HP 12GB [2x2GB, 2x4GB] DDR2-800 ECC RAM HP 16GB [4x4GB] DDR2-800 ECC RAM NOTE: Only unbuffered DDR2 DIMMs are supported. All DIMMs must be either x8 or x16 width.After Market Options [AMO] [Configurations less than 1 GB are not supported on Microsoft Vista 64 or Vista 64 downgrade to XP 64. Please install memory in pairs. Configurations using three DIMMs are not supported by HP.] PC2-6400 ECC Unbuffered DDR2-800 RAM 1 GB PC2-6400E DDR2-800 ECC GH739AA 2 GB PC2-6400E DDR2-800 ECC GH740AA 4 GB PC2-6400E DDR2-800 ECC VH933AA NOTE: Only unbuffered DDR2 DIMMs are supported. All DIMMs must be either x8 or x16 width. Memory must be installed in pairs.

Multimedia and Audio Devices

Factory Configured

Option Kit

Option Kit Part Number

Support Notes

HP Thin USB Powered SpeakersYYRD628AA Integrated High Definition audio with internal speaker

Y

Y

Sound Blaster X-Fi XtremeGamer Audio Card [PCI]

Y

Y

GE257A

Optical and Removable Storage

Factory Configured

Option Kit

Option Kit Part Number

Support Notes HP DVD+/-RW Drive

Y

Y

See NOTE 1 HP DVD-ROM Drive

Y

Y

EW268AA

See NOTE 2 1.44 MB Diskette Drive [1 only] YY DY670A HP 16-In-1 Media Card Reader with PCI Card

Y

Y

EM718AA

NOTE 1: LightScribe creates a grayscale image similar to black and white photography. LightScribe media required and sold separately. Double-layer discs can store more data than single layer discs. However, double-layer discs burned with this drive may not be compatible with many existing single-layer DVD drives and players. NOTE 2: Not supported as a 2nd drive option.

Controller Cards

Factory Configured

Option Kit

Option Kit Part Number

Support Notes

HP Firewire/IEEE 1394a PCI Card

Y

Y

PA997A

Monitors Factory Configured

Option Kit

Option Kit Part Number

Support Notes

HP LP2275w 22-inch Widescreen LCD Monitor Y

Y

HP LP2465 24-inch Widescreen LCD Monitor Y

Y

HP LP3065 30-inch Widescreen LCD Monitor Y

Y

Networking and Communications

Factory Configured

Option Kit

Option Kit Part Number

Support Notes

Integrated Broadcom 5755 NetXtreme Gigabit Ethernet PCIe NIC

Y

Y Broadcom 5751 NetXtreme Gigabit Ethernet PCIe NIC Y Y EA833AA "Gigabit" Ethernet indicates compliance with IEEE standard 802.3ab for Gigabit Ethernet, and does not connote actual operating speed of 1 Gb/sec. For high speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required. NOTE 1: Certain Windows Vista product features require advanced or additional hardware. Windows Vista Upgrade Advisor can help you determine which features of Windows Vista will run on your computer. . .

Input Devices

Factory Configured

Option Kit

Option Kit Part Number

Support Notes

HP USB Standard Keyboard Y Y DT528A HP PS/2 Standard Keyboard Y Y

DT527A

HP USB Laser Mouse Y Y

GW405AA

HP PS/2 Optical Scroll Mouse Y Y

EY703AA

HP USB 2-Button Optical Scroll Mouse Y Y DC172B HP USB Optical 3-Button Mouse Y Y DY651AA HP USB Smart Card Keyboard N Y HP 2.4GHz Wireless Keyboard & Mouse N Y NB896AA HP SpaceExplorer 3D USB Controller N Y

RY429AA

HP SpacePilot 3D USB Intelligent Controller N Y

EF390AA

Racking and Physical Security

Factory Configured

Option Kit

Option Kit Part Number

Support Notes

HP [CMT] Solenoid Lock Y

Y

DE618A

Security Cable with Kensington Lock Y

Y

PC766A

HP 2006 Business PC Security Lock Kit Y Y PV606AA HP xw4/Z4 Depth Adjustable Fixed Rail Rack Kit Y

Y

EK729AA

Other Hardware

Factory Configured

Option Kit

Option Kit Part Number

Support Notes

Configure minitower in desktop orientation Y Y HP Power Cord Kit Y Y DM293A Needs specific localization HP Serial Port Adapter Y Y PA716A One standard, one optional HP Internal USB Port Kit N Y EM165AA Up to two internal USB port kits can be used to provide two internal USB ports HP Optical Bay HDD Mounting Bracket Y Y DY659A Modem RJ11 Adapter Kit Y Y DC131C

Software

Factory Configured

Option Kit

Option Kit Part Number

Support Notes

Alert Standard Format specification

Y

Y

HP Performance Tuning Framework

Y

Y

HP Backup and Recovery

Y

Y

PDF Complete

Y

Y

Microsoft Office 2007 Small Business Edition

Y

Y

HP ProtectTools Security Y Y HP RGS PC 3-year Software Assurance Y Y HP RGS V5 PC Edition Y Y HP RGS V5 Workstation Edition Y Y HP RGS Workstation 3-year Software Assurance Y Y HP RGS V5 Receiver Site License Y Y

System Technical Specifications

System Board System Board Form Factor ATX 243.84 x 304.8 mm [9.6 x 12 inches] Processor Socket Single LGA775 CPU Bus Speed 800, 1066, and 1333 MHz FSB Chipset Intel X38 Express North Bridge/ICH9R South Bridge Super I/O Controller SMSC SCH5327 Memory Expansion Slots 4 DDR2 memory slots Memory Type Supported 1.8V DDR2 [ECC memory modules] Memory Modes

Dual channel

Memory Speed Supported DDR2 SDRAM PC2-5300E [667 MHz] unbuffered ECC or DDR2 SDRAM PC2-6400E [800 MHz] unbuffered ECC Memory Protection

ECC available on data, parity on address and command

ECC/Chipkill Parameters Maximum Memory Supports up to 16 GB DDR2-667 or DDR2-800 ECC unbuffered memory

NOTE: Maximum memory capacities assume 64-bit operating systems, such as genuine Windows® Vista Business 64, XP Professional x64 Edition, Red Hat Linux 64-bit. Genuine Windows Vista Business 32 and XP Professional [32-bit] support up to 4 GB. 32-bit Linux supports up to 8 GB.

Memory Configuration [Supported] PC2-5300E DDR2-667 ECC Unbuffered or PC2-6400E DDR2-800 ECC Unbuffered RAM DIMMs Only Error Checking and Correcting unbuffered DDR2 DIMMs are supported and must be either x8 or x16 width. Memory upgrades are accomplished by adding DIMMs of the same or varied sizes. The Intel chipset supports both PC2-5300 DDR2-667 and the PC2-6400E DDR2-800 ECC unbuffered memory. It is suggested to not mix ECC and non-ECC memory. For best performance the total amount and type of memory loaded into Channel A and Channel B should be the same. If it is not, your computer will see all the RAM installed but will run the memory controller at a lower performance mode. Although not required, for best performance add the memory in pairs rather than as a single DIMM [two 1 GB DIMMs will have better performance than a single 2 GB DIMM]. Also, add the memory into both channels [e.g., one in socket 1 and one in socket 3] to take advantage of dual channel performance. If you have unused slots within a channel, make them socket 2 and socket 4. This provides the best margin for the memory bus. If you are only using 1 DIMM, install it in socket 1.

POSSIBLE MEMORY CONFIGURATIONS Not all memory configurations possible are represented below. Please install memory in pairs. Configurations using three DIMMs are not supported by HP.

DIMM Size Slot 1 Slot 2 Slot 3 Slot 4 512 MB [single channel performance configuration] 512 MB 1 GB 512 MB 512 MB 1 GB 2 GB 1 GB 1 GB 2 GB 512 MB 512 MB 512 MB 512 MB 4 GB 1 GB 1 GB 1 GB 1 GB 4 GB 2 GB 2 GB 4 GB 6 GB 1 GB 2 GB 1 GB 2 GB 8 GB 2 GB 2 GB 2 GB 2 GB 8 GB 4 GB 4 GB 16 GB 4 GB 4 GB 4 GB 4 GB 32 GB PCI Express Connectors [Gen2 Rev 0.7 connectors]

2 PCI Express x16 Gen2 Rev 0.7 [75W+75W] 1 PCI Express x8' [x4 electrical] 1 PCI Express x1

PCI Connectors [5.0V]

2 full length, 1 half-length 33 MHz 32-Bit

Interfaces Supported

SATA

1 SATA 3.0 Gb/s interface [5 SATA connectors] gen2

Serial Attached SCSI Hardware RAID is not supported on Linux systems. The Linux kernel, with built-in software RAID, provides excellent functionality and performance. It is a good alternative to hardware-based RAID. Please visit: //h20000.www2.hp.com/bc/docs/support/SupportManual/c00060684/c00060684.pdf for RAID capabilities with Linux.] Integrated RAID

• RAID 0, 1, 5*, or 10*on a single array, up to 4 hard drives depending on the RAID level supported [RAID 0 and 1 available factory integrated]
• Support for 1 or 2 RAID arrays on 4-ports for RAID 0 or 1
• RAID 1 spare and auto-rebuild
• Matrix RAID support
• AHCI support for NCQ drives
• 3.0 Gb/s drive support

NOTE: Specific user-configured hardware SAS RAID configurations are supported on this Linux system. Please visit: //www.hp.com/support/linux_hardware_matrix for details.

Network Controller Integrated Broadcom 5755 Gigabit Ethernet LOM External SATA [eSATA] 1 dedicated rear eSATA, 1.5 Gbps IDE connector No Floppy connector Yes LAN [RJ45] Yes Serial Yes 2nd Serial Yes [requires optional 2nd Serial Port Adapter] Parallel Yes Audio Integrated high definition digital audio with Line in, Line Out, Microphone, Headphone CD-ROM input/Audio No AUX INPUT; Audio Yes USB Connector[s]

Front

2

Rear

7

Internal

3 [one Female Type A and one dual channel 2x5 pin header]

Flash ROM

Yes

Clear Fan Header Yes CPU Fan Header

Yes

Chasiss Fan Header Yes Front PCI Fan Header Yes Front Control Panel/Speaker Header

Yes

CMOS Battery Holder - Lithium Yes Integrated Trusted Platform Module TPM 1.2 integrated in Broadcom LOM Power Supply Headers Yes Power Switch, Power LED & Hard Drive LED Header Yes Clear Password Jumper Yes Power Supply 475 watt custom power supply Operating Voltage Range 90 - 269 VAC Rated Voltage Range 100 - 240 VAC 118 VAC Rated Line Frequency 50/60 Hz 400Hz Operating Line Frequency Range 47 - 66 Hz 393-407 Hz Rated Input Current 10 A @ 100-127 VAC; 6A @ 200-240 VAC 10 A @ 118 VAC Heat Dissipation Typical 1419 btu/hr [358 kg-cal/hr] Maximum 2027 btu/hr [511 kg-cal/hr] Power Supply Fan 92x25 mm variable speed ENERGY STAR® qualified [Config Dependent] Yes 80 PLUS Compliant Yes FEMP Standby Power Compliant 115V [Wake-on LAN disabled] [