HP laptop charger port is loose Remove battery. From the battery cover to HDD cover, remove all the covers from the back of your HP laptop. Remove all the screws. Detach all the wires and cables. Remove the screws where the antennas were attached.
How can I fix my loose laptop charger port?
If the power jack is loose,solder some connections and reconnect it to the motherboard. Disassemble the laptop. Next, remove the motherboard and power jack to the repair shop. You can also replace the internal charging board.
Can the charging port on a laptop be fixed?
To fix a laptop charger port, you need to first identify the source of the problem. If the power jack is connected to the motherboard, you can easily remove and replace it. On the other hand, if the power jack goes soldered to the motherboard, you’ll have to desolder it and replace it with a good one.
How much does it cost to fix charging port on laptop?
The average repairing cost of a laptop charging port falls between $35 and $50. It is not a fixed price. It will vary according to the damage to your charging port and the model of your laptop. Some technicians may cost higher prices according to their experience or fixed rates, extending to $350.
How do I know if my laptop charger port is broken?
Wiggling the power plug, if it gets hot, or see sparks, then it is the adaptor having a bad plug. If the power plug is loose or plugs in weak. I have seen carbonizing and burned traces where the power port was soldered in or on the logic board. You can sometimes repair that with soldering.
How long does it take to repair a laptop charging port?
If you have the time to sit and wait we can typically have it back to you within 45 minutes – maybe even faster!.
How can I charge my laptop with a broken charger port?
Remember, if you lose your laptop charger and you desperately need to get it powered back up, you can always: Charge your laptop via USB-C. Use an adapter to charge your laptop in a vehicle. Charge your laptop with a power bank.
How much does it cost to fix the charging port on a Asus laptop?
How Much Does It Cost To Fix A Laptop Charger Port? Brand Average Port Cost Average Technician Cost Asus $13 $100 Apple $50 $100 Dell $5 $100 Hp $5 $100.
Why is my laptop not charging?
While there are plenty of variables that could play into your laptop battery losing its charge, we’ve narrowed down the most popular causes into three key culprits: power cord issues, software malfunction, and declining battery health.
Why is my HP laptop plugged in but not charging?
Faulty BIOS settings can sometimes cause laptop battery not charging issues. To fix your HP laptop battery, try updating your laptop BIOS. To update your laptop BIOS, go to the HP official site and find the support page of your laptop. Then download the latest BIOS update and install it on your computer.
Why does my charging port get loose?
Well, typically the culprit is just pocket lint clogging your charge port and you can easily fix this problem in just 3 easy steps.
How much is a charger port replacement?
Expect to pay between $50 and $90 for professional Samsung charging port replacement, depending on your model and selected service. It’s a good idea to see if your repair shop offers any warranties on parts and labor.
Is there another way to charge a laptop?
First, you’ll need a USB Type-C to USB Type-C cable. Next, connect your phone to your laptop, and find your phone’s USB settings. This will be different depending on whether you’re using Android or iOS. Once that’s done, your smartphone battery will quickly drain, and your laptop battery will come back to life.
Can I charge my laptop with HDMI cable?
Can I charge my laptop with an HDMI cable? No. You can’t. There is no circuit on a laptop that transfers any power from the HDMI port to the battery.
How do you fix a broken USB port on a computer?
How to Fix USB Port Issues Restart your computer. Look for debris in the USB port. Check for loose or broken internal connections. Try a different USB port. Swap to a different USB cable. Plug your device into a different computer. Try plugging in a different USB device. Check the device manager [Windows].
How do I manually charge my laptop battery?
All your system needs is a USB-C recharge port. Just attach the power bank to the USB-C connection, and your battery will charge immediately. It’s a small, comfortable, and trouble-free way to capture a laptop battery.
How do I fix my laptop not charging Windows 10?
Resolve Issues Preventing Your Battery from Charging in Windows 10 Run Windows 10 Battery Diagnostics. Check if Your AC Power Supply is Properly Connected. Try a Different Wall Outlet and Check for Low Voltage and Electrical Issues. Test with Another Charger. Remove All External Devices.
How do I fix battery 0% plugged in charging?
Other things you can try. Run Windows 10 Battery Diagnostics. Check if Your AC Power Supply is Properly Connected. Try a Different Wall Outlet and Check for Low Voltage and Electrical Issues. Test with Another Charger. Remove All External Devices. Check Your Connectors for Dirt or Damage.
Can I use my laptop without battery?
You can use a laptop without the battery as long as it is connected to the power brick and an outlet. but if the plug comes lose at all by just enough your system will turn off and can damage files and the OS even.
How much does a USB C charger cost?
Compare with similar items This item Amazon Basics USB Type-C to USB Type-C 2.0 Charger Cable – 6-Foot, White Customer Rating 4.5 out of 5 stars [22353] Price $899 Shipping FREE Shipping on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime Sold By Amazon.com.
Why do USB-C ports become loose?
A USB-C port can become loose over time due to dust and dirt getting into the slot. This can cause a computer to not recognize the USB-C device. This will prevent you from accessing the pen drive or any such device that you’re trying to connect.
Do USB-C ports wear out?
Yes. All USB ports are prone to wear. Type C connections should have a MTBF of 10,000 connect-disconnect cycles.
Chosen Solution
This is a replaceable power port which makes your job easy its not soldered to the motherboard. All you have to do is tear down the laptop till you get to the point were you can see the port and remove it. and replace with a new one which can be found on ebay
//www.ebay.ca/sch/i.html?_odkw=HP+P...
there is a guide on ifixit though it is incomplete it should help with the disassemble
Disassembling HP Pavilion dv9000 Logic board
Hope this helps
How to Fix a Loose Laptop Charging Port
To fix a loose charging port on a laptop, you need to replace the AC power input jack from inside the laptop.
Before taking any action, first, confirm that it’s the charging port’s fault. A loose connection may also occur from the motherboard or the charger cable.
If you continue forcing the charger into the port frequently, then indeed the port will become a faulty one.
And if you are sure that it’s the charging port that is faulty, then follow the steps written down below, and see if it helps.
- First thing first, you need to discover the laptop’s SKU number so that you can easily find out the service manual for your laptop.
- Now undo the entire screws and release the lid.
- Then separate your keyboard from the laptop and unlock all the wires and cables from the side of your laptop’s motherboard. Also, slide out the optical drive.
- After sliding out the optical drive, flip the laptop and find out if anywhere any screws are left which are holding the shell and unscrew them.
- Now take a slim but strong object like a credit card and open the laptop’s top and bottom shell.
- Now very gently separate the bottom shell.
- Focus on the left hinge as now you are going to tilt the laptop lid open in a direction which is not directed to the motherboard.
- Disconnect the AC power input jack from the motherboard. Inspect in very thoroughly and find out the part number.
- Now it will be easier to order a replacement part.
- Once the new part arrives, simple reversed the above steps and put your laptop together
- Turn on your laptop after charging the battery with the help of your AC adapter.
Sometimes a long-term accommodation of dust in the charging port can give birth to this kind of problem. Try cleaning it up yourself or take it to the service center.
Can I Repair a loose Laptop Charging Port?
If you have skills, then you can, and if you don’t have, then you must visit the service centre as soon as possible.
- If it is either the plug or cable which transfers the power supply, then you can just buy another one. Because if you somehow fix the power adapter, it will not stay very long
- If it’s not that power adapter, then it can be the laptop’s internal jack. Which also needs to be replaced
- If the power jack has become loose, then you will need soldering iron in order to reattach it with the motherboard. But if the power jack not only loosen up but also damaged then replacement would be a good option.
Multiple solutions are depending on the root cause of the problem, which is why, at first, you need to find out the reason and make sure if it is the charging port or something else.
What is the cost of repairing a damaged laptop charging port?
The replacement cost of a laptop’s charging port completely depends on the brand and model of your computer.
Some parts are easily replaceable with a 1 or 2-hour work within $8, but some other parts are directly connected to the motherboard. So any damage in those parts may require changing the entire motherboard.
Similarly, some charging jacks are located in such a position inside the laptop that the whole laptop will have to be disassembled just to replace that port or fix it.
As a result, the labor cost will be higher only than the replacement cost.
Generally, the cost of replacing the jack or port would be around $100, but depending on the situation, it can reach up to $350.
Even some models have their charging port keep breaking all the time. It happens because the port or jack is connected with lots of complications, and the cost can be up to $65.
How to Test Laptop Charging Port
You may face the following situations if your laptop has a hard time to charge up;
- The battery is reducing continuously even though charger is plugged in
- The power light or the battery light is not turning on connecting the charger
- You are unable to power up your laptop
- Windows is giving you message that your battery is not charging
Check the laptop charger
Use a multimeter to check if your laptop charger is working correctly. If the charger is working, then move ahead to the next step, and if it is not working, then replace it.
Battery charging circuit
Now you will be testing the pins which are connected to the battery. You need to be very careful while running these days because if any of the pins are shorted, then your laptop’s motherboard will be damaged.
If the battery circuit is working correctly and sending the correct voltage, the problem is most likely with the battery.
DC Jack
The port where you plug in your charger cable is DC Jack. Because DC Jacks are used a lot, breaking or damaging it is a very common problem.
Apart from clearing dust from Jack, you cannot do much from the outside. You need to open your laptop and examine the issue from inside.
How to Replace a Broken Laptop Charging Port
The following steps will guide you so that you can replace the charging port correctly.
Diagnostics
As you are doing the process yourself, first check out a few videos on the Internet and see how your DC Jack is supposed to be and ensure that your DC Jack is damaged.
Things you need
- Soldering iron
- Multimeter
- Paper
- Pen
- Tiny screwdrivers
- New DC Jack
- Disposable cups
- Thermal compound
- Isopropanol
- Desoldering braid
When you are disassembling your laptop, you will find lots of screws, and maybe some of them are hidden. So first, draw a map on a paper on the location of the screw.
Remove the optical drive, hard drive battery, and the other things you need to remove. After removing the screws, put them into separate cups so that reassembling can be more manageable.
You need to be very gentle while removing the plate connector. Then detach all the wires and cables which are attached to the plate.
Now it’s time to remove the keyboard by unscrewing the particular screws. Also, remove the LCD.
- Exoskeleton and endoskeleton
Next, you will be removing the plastic exoskeleton and endoskeleton.
Now you will see the circuit board for DC power. Remove the jack.
Just like you removed the old DC power jack, reverse the steps and put the new one in place.
You may reverse the above steps to reassemble your laptop, but before placing the endoskeleton in place, clean up the thermal compound.
Finally, turn your laptop on and remember to use an AC adapter.
HP laptop charger port is loose
Here is the step by step guide of changing the loose charger port from the HP laptop;
- Remove battery
- From the battery cover to HDD cover, remove all the covers from the back of your HP laptop
- Remove all the screws
- Detach all the wires and cables
- Remove the screws where the antennas were attached
- Flip your laptop to the front, open it, and gently pry open the plastic bar located above the keyboard.
- Take off the keyboard and along with that, carefully remove the ribbon cable and other wires
- Disconnect all the Wi-Fi works and then the connector from the Fort located beside the metal tabs
- At the top right and left corner, you will see black screws; remove them. Now you can separate the screen part of the laptop from the keyboard part.
- Now remove the motherboard, optical drive, and express card.
- Locate the charging ports and remove it.
Reverse the above steps after attaching the new charging port.
Lenovo laptop charger port is loose
Loosening up the charger port is a very common problem as the sport is the most used one. You can easily find a manual that will guide you step by step, and you can change your charging port. But there can be other solutions than replacing it.
- If you have noticed the socket closely, you may have seen a plastic or rubber material around the inside space of the port. Maybe replacing it can fix the problem.
- Tighten up the Jack through using the scotch tape’s thin strip. Using it only at one side will do the work.
- The charging port is the open space of a laptop. So dust can be easily accommodated in it, even if you are using the laptop every day. You may see dost in the spaces around the charging port, which are open but unused. Now, clean the dirt with any painting brush.
Replacing the charging port of a Lenovo laptop will not cost you very much. So if you don’t like any hassle, then visit your nearest Lenovo service centre and get your job done quickly.
Asus laptop charger port is not working
If your laptop is not charging, then it is not always a problem with the charger port. Try the following fixes and see if your problem can be fixed:
Hardware issues
If your Asus laptop is consuming battery even after logging in to the charger, then maybe the problem lies with the hardware. First, make sure to connect your AC adapter correctly and tightly. If still, it’s not working, then perhaps the AC adaptor is damaged. At first, troubleshoot hardware issues then try a new AC adapter.
Battery driver
Before changing the battery or the charging port, make sure all of your battery drivers are up to date.
Power reset
Perform a power reset and see if the issue is still intact or not.
Asus battery health charging
Another possible troubleshooting you can perform before changing either battery or the charging port. Make sure your battery health mode is set to full capacity.
The feature, “Asus battery health charging” can specifically found in Asus laptops.
There are three options, full capacity mode, maximum lifespan mode, and balanced mode. Setting it to the full capacity mode may solve your problem.
If any of the above does not work, then first visit the service centre and make sure there is no other option left than changing the battery or the charging port.
Acer aspire laptop charger port is not working
- The reason for this problem may be internal. This means, somehow, one cable or two, you have been separated from its place. If this is the situation, get ready to open your laptop up and fix it.
- Another possible reason is that maybe the outer electrode has weakened. It can be more complicated to fix than changing or repairing any internal cable.
- Check the AC adaptor with the help of a multimeter and see if it is transferring proper voltage. Maybe changing the AC adaptor can solve the charging issues
- Make sure the battery is alright. Try fixing the problem by updating battery drivers.
- Does the hardware heat up? Check if the heatsink is working correctly and replace the thermal compound. Maybe it can solve the charging problem.
If even after replacing the laptop charger, the Acer Aspire laptop is still facing charging issues then it’s time to replace the charging port. Find out the laptop’s SKU number and then find the manual of changing the charging port, particularly for your laptop.